Class: Display

Guacamole.Display

new Display()

The Guacamole display. The display does not deal with the Guacamole protocol, and instead implements a set of graphical operations which embody the set of operations present in the protocol. The order operations are executed is guaranteed to be in the same order as their corresponding functions are called.
Source:

Classes

VisibleLayer

Members

cursorHotspotX :Number

The X coordinate of the hotspot of the mouse cursor. The hotspot is the relative location within the image of the mouse cursor at which each click occurs.
Type:
  • Number
Source:

cursorHotspotY :Number

The Y coordinate of the hotspot of the mouse cursor. The hotspot is the relative location within the image of the mouse cursor at which each click occurs.
Type:
  • Number
Source:

cursorX :Number

The current X coordinate of the local mouse cursor. This is not necessarily the location of the actual mouse - it refers only to the location of the cursor image within the Guacamole display, as last set by moveCursor().
Type:
  • Number
Source:

cursorY :Number

The current X coordinate of the local mouse cursor. This is not necessarily the location of the actual mouse - it refers only to the location of the cursor image within the Guacamole display, as last set by moveCursor().
Type:
  • Number
Source:

Methods

arc(layer, x, y, radius, startAngle, endAngle, negative)

Add the specified arc to the current path.
Parameters:
Name Type Description
layer Guacamole.Layer The layer to draw upon.
x Number The X coordinate of the center of the circle which will contain the arc.
y Number The Y coordinate of the center of the circle which will contain the arc.
radius Number The radius of the circle.
startAngle Number The starting angle of the arc, in radians.
endAngle Number The ending angle of the arc, in radians.
negative Boolean Whether the arc should be drawn in order of decreasing angle.
Source:

clip(layer)

Clip all future drawing operations by the current path. The current path is implicitly closed. The current path can continue to be reused for other operations (such as fillColor()) but a new path will be started once a path drawing operation (path() or rect()) is used.
Parameters:
Name Type Description
layer Guacamole.Layer The layer to affect.
Source:

close(layer)

Closes the current path by connecting the end point with the start point (if any) with a straight line.
Parameters:
Name Type Description
layer Guacamole.Layer The layer to draw upon.
Source:

copy(srcLayer, srcx, srcy, srcw, srch, dstLayer, x, y)

Copy a rectangle of image data from one Layer to this Layer. This operation will copy exactly the image data that will be drawn once all operations of the source Layer that were pending at the time this function was called are complete. This operation will not alter the size of the source Layer even if its autosize property is set to true.
Parameters:
Name Type Description
srcLayer Guacamole.Layer The Layer to copy image data from.
srcx Number The X coordinate of the upper-left corner of the rectangle within the source Layer's coordinate space to copy data from.
srcy Number The Y coordinate of the upper-left corner of the rectangle within the source Layer's coordinate space to copy data from.
srcw Number The width of the rectangle within the source Layer's coordinate space to copy data from.
srch Number The height of the rectangle within the source Layer's coordinate space to copy data from.
dstLayer Guacamole.Layer The layer to draw upon.
x Number The destination X coordinate.
y Number The destination Y coordinate.
Source:

createBuffer() → {Guacamole.Layer}

Creates a new buffer. Buffers are invisible, off-screen surfaces. They are implemented in the same manner as layers, but do not provide the same nesting semantics.
Source:
Returns:
The newly-created buffer.
Type
Guacamole.Layer

createLayer() → {Guacamole.Display.VisibleLayer}

Creates a new layer. The new layer will be a direct child of the default layer, but can be moved to be a child of any other layer. Layers returned by this function are visible.
Source:
Returns:
The newly-created layer.
Type
Guacamole.Display.VisibleLayer

curveTo(layer, cp1x, cp1y, cp2x, cp2y, x, y)

Starts a new path at the specified point.
Parameters:
Name Type Description
layer Guacamole.Layer The layer to draw upon.
cp1x Number The X coordinate of the first control point.
cp1y Number The Y coordinate of the first control point.
cp2x Number The X coordinate of the second control point.
cp2y Number The Y coordinate of the second control point.
x Number The X coordinate of the endpoint of the curve.
y Number The Y coordinate of the endpoint of the curve.
Source:

draw(layer, x, y, url)

Draws the image at the specified URL at the given coordinates. The image will be loaded automatically, and this and any future operations will wait for the image to finish loading.
Parameters:
Name Type Description
layer Guacamole.Layer The layer to draw upon.
x Number The destination X coordinate.
y Number The destination Y coordinate.
url String The URL of the image to draw.
Source:

drawBlob(layer, x, y, blob)

Draws the image contained within the specified Blob at the given coordinates. The Blob specified must already be populated with image data.
Parameters:
Name Type Description
layer Guacamole.Layer The layer to draw upon.
x Number The destination X coordinate.
y Number The destination Y coordinate.
blob Blob The Blob containing the image data to draw.
Source:

drawImage(layer, x, y, image)

Draws the specified image at the given coordinates. The image specified must already be loaded.
Parameters:
Name Type Description
layer Guacamole.Layer The layer to draw upon.
x Number The destination X coordinate.
y Number The destination Y coordinate.
image Image The image to draw. Note that this is an Image object - not a URL.
Source:

fillColor(layer, r, g, b, a)

Fills the current path with the specified color. The current path is implicitly closed. The current path can continue to be reused for other operations (such as clip()) but a new path will be started once a path drawing operation (path() or rect()) is used.
Parameters:
Name Type Description
layer Guacamole.Layer The layer to draw upon.
r Number The red component of the color to fill.
g Number The green component of the color to fill.
b Number The blue component of the color to fill.
a Number The alpha component of the color to fill.
Source:

fillLayer(layer, srcLayer)

Fills the current path with the image within the specified layer. The image data will be tiled infinitely within the stroke. The current path is implicitly closed. The current path can continue to be reused for other operations (such as clip()) but a new path will be started once a path drawing operation (path() or rect()) is used.
Parameters:
Name Type Description
layer Guacamole.Layer The layer to draw upon.
srcLayer Guacamole.Layer The layer to use as a repeating pattern within the fill.
Source:

flatten() → {HTMLCanvasElement}

Returns a canvas element containing the entire display, with all child layers composited within.
Source:
Returns:
A new canvas element containing a copy of the display.
Type
HTMLCanvasElement

flush(callback)

Flush all pending draw tasks, if possible, as a new frame. If the entire frame is not ready, the flush will wait until all required tasks are unblocked.
Parameters:
Name Type Description
callback function The function to call when this frame is flushed. This may happen immediately, or later when blocked tasks become unblocked.
Source:

getCursorLayer() → {Guacamole.Display.VisibleLayer}

Returns the cursor layer of this display. Each Guacamole display contains a layer for the image of the mouse cursor. This layer is a special case and exists above all other layers, similar to the hardware mouse cursor.
Source:
Returns:
The cursor layer.
Type
Guacamole.Display.VisibleLayer

getDefaultLayer() → {Guacamole.Display.VisibleLayer}

Returns the default layer of this display. Each Guacamole display always has at least one layer. Other layers can optionally be created within this layer, but the default layer cannot be removed and is the absolute ancestor of all other layers.
Source:
Returns:
The default layer.
Type
Guacamole.Display.VisibleLayer

getElement() → {Element}

Returns the element which contains the Guacamole display.
Source:
Returns:
The element containing the Guacamole display.
Type
Element

getHeight() → {Number}

Returns the height of this display.
Source:
Returns:
The height of this display;
Type
Number

getScale() → {Number}

Returns the scale of the display.
Source:
Returns:
The scale of the display.
Type
Number

getWidth() → {Number}

Returns the width of this display.
Source:
Returns:
The width of this display;
Type
Number

lineTo(layer, x, y)

Add the specified line to the current path.
Parameters:
Name Type Description
layer Guacamole.Layer The layer to draw upon.
x Number The X coordinate of the endpoint of the line to draw.
y Number The Y coordinate of the endpoint of the line to draw.
Source:

moveCursor(x, y)

Sets the location of the local cursor to the given coordinates. For the sake of responsiveness, this function performs its action immediately. Cursor motion is not maintained within atomic frames.
Parameters:
Name Type Description
x Number The X coordinate to move the cursor to.
y Number The Y coordinate to move the cursor to.
Source:

moveTo(layer, x, y)

Starts a new path at the specified point.
Parameters:
Name Type Description
layer Guacamole.Layer The layer to draw upon.
x Number The X coordinate of the point to draw.
y Number The Y coordinate of the point to draw.
Source:

play(layer, mimetype, duration, url)

Plays the video at the specified URL within this layer. The video will be loaded automatically, and this and any future operations will wait for the video to finish loading. Future operations will not be executed until the video finishes playing.
Parameters:
Name Type Description
layer Guacamole.Layer The layer to draw upon.
mimetype String The mimetype of the video to play.
duration Number The duration of the video in milliseconds.
url String The URL of the video to play.
Source:

pop(layer)

Pop layer state off stack.
Parameters:
Name Type Description
layer Guacamole.Layer The layer to draw upon.
Source:

push(layer)

Push current layer state onto stack.
Parameters:
Name Type Description
layer Guacamole.Layer The layer to draw upon.
Source:

put(srcLayer, srcx, srcy, srcw, srch, dstLayer, x, y)

Put a rectangle of image data from one Layer to this Layer directly without performing any alpha blending. Simply copy the data.
Parameters:
Name Type Description
srcLayer Guacamole.Layer The Layer to copy image data from.
srcx Number The X coordinate of the upper-left corner of the rectangle within the source Layer's coordinate space to copy data from.
srcy Number The Y coordinate of the upper-left corner of the rectangle within the source Layer's coordinate space to copy data from.
srcw Number The width of the rectangle within the source Layer's coordinate space to copy data from.
srch Number The height of the rectangle within the source Layer's coordinate space to copy data from.
dstLayer Guacamole.Layer The layer to draw upon.
x Number The destination X coordinate.
y Number The destination Y coordinate.
Source:

rect(layer, x, y, w, h)

Add the specified rectangle to the current path.
Parameters:
Name Type Description
layer Guacamole.Layer The layer to draw upon.
x Number The X coordinate of the upper-left corner of the rectangle to draw.
y Number The Y coordinate of the upper-left corner of the rectangle to draw.
w Number The width of the rectangle to draw.
h Number The height of the rectangle to draw.
Source:

reset(layer)

Reset the layer, clearing the stack, the current path, and any transform matrix.
Parameters:
Name Type Description
layer Guacamole.Layer The layer to draw upon.
Source:

resize(layer, width, height)

Changes the size of the given Layer to the given width and height. Resizing is only attempted if the new size provided is actually different from the current size.
Parameters:
Name Type Description
layer Guacamole.Layer The layer to resize.
width Number The new width.
height Number The new height.
Source:

scale(scale)

Sets the scale of the client display element such that it renders at a relatively smaller or larger size, without affecting the true resolution of the display.
Parameters:
Name Type Description
scale Number The scale to resize to, where 1.0 is normal size (1:1 scale).
Source:

setChannelMask(layer, mask)

Sets the channel mask for future operations on this Layer. The channel mask is a Guacamole-specific compositing operation identifier with a single bit representing each of four channels (in order): source image where destination transparent, source where destination opaque, destination where source transparent, and destination where source opaque.
Parameters:
Name Type Description
layer Guacamole.Layer The layer to modify.
mask Number The channel mask for future operations on this Layer.
Source:

setCursor(hotspotX, hotspotY, layer, srcx, srcy, srcw, srch)

Sets the hotspot and image of the mouse cursor displayed within the Guacamole display.
Parameters:
Name Type Description
hotspotX Number The X coordinate of the cursor hotspot.
hotspotY Number The Y coordinate of the cursor hotspot.
layer Guacamole.Layer The source layer containing the data which should be used as the mouse cursor image.
srcx Number The X coordinate of the upper-left corner of the rectangle within the source layer's coordinate space to copy data from.
srcy Number The Y coordinate of the upper-left corner of the rectangle within the source layer's coordinate space to copy data from.
srcw Number The width of the rectangle within the source layer's coordinate space to copy data from.
srch Number The height of the rectangle within the source layer's coordinate space to copy data from.
Source:

setMiterLimit(layer, limit)

Sets the miter limit for stroke operations using the miter join. This limit is the maximum ratio of the size of the miter join to the stroke width. If this ratio is exceeded, the miter will not be drawn for that joint of the path.
Parameters:
Name Type Description
layer Guacamole.Layer The layer to modify.
limit Number The miter limit for stroke operations using the miter join.
Source:

setTransform(layer, a, b, c, d, e, f)

Sets the given affine transform (defined with six values from the transform's matrix).
Parameters:
Name Type Description
layer Guacamole.Layer The layer to modify.
a Number The first value in the affine transform's matrix.
b Number The second value in the affine transform's matrix.
c Number The third value in the affine transform's matrix.
d Number The fourth value in the affine transform's matrix.
e Number The fifth value in the affine transform's matrix.
f Number The sixth value in the affine transform's matrix.
Source:

showCursor(shownopt)

Sets whether the software-rendered cursor is shown. This cursor differs from the hardware cursor in that it is built into the Guacamole.Display, and relies on its own Guacamole layer to render.
Parameters:
Name Type Attributes Default Description
shown Boolean <optional>
true Whether to show the software cursor.
Source:

strokeColor(layer, cap, join, thickness, r, g, b, a)

Stroke the current path with the specified color. The current path is implicitly closed. The current path can continue to be reused for other operations (such as clip()) but a new path will be started once a path drawing operation (path() or rect()) is used.
Parameters:
Name Type Description
layer Guacamole.Layer The layer to draw upon.
cap String The line cap style. Can be "round", "square", or "butt".
join String The line join style. Can be "round", "bevel", or "miter".
thickness Number The line thickness in pixels.
r Number The red component of the color to fill.
g Number The green component of the color to fill.
b Number The blue component of the color to fill.
a Number The alpha component of the color to fill.
Source:

strokeLayer(layer, cap, join, thickness, srcLayer)

Stroke the current path with the image within the specified layer. The image data will be tiled infinitely within the stroke. The current path is implicitly closed. The current path can continue to be reused for other operations (such as clip()) but a new path will be started once a path drawing operation (path() or rect()) is used.
Parameters:
Name Type Description
layer Guacamole.Layer The layer to draw upon.
cap String The line cap style. Can be "round", "square", or "butt".
join String The line join style. Can be "round", "bevel", or "miter".
thickness Number The line thickness in pixels.
srcLayer Guacamole.Layer The layer to use as a repeating pattern within the stroke.
Source:

transfer(srcLayer, srcx, srcy, srcw, srch, dstLayer, x, y, transferFunction)

Transfer a rectangle of image data from one Layer to this Layer using the specified transfer function.
Parameters:
Name Type Description
srcLayer Guacamole.Layer The Layer to copy image data from.
srcx Number The X coordinate of the upper-left corner of the rectangle within the source Layer's coordinate space to copy data from.
srcy Number The Y coordinate of the upper-left corner of the rectangle within the source Layer's coordinate space to copy data from.
srcw Number The width of the rectangle within the source Layer's coordinate space to copy data from.
srch Number The height of the rectangle within the source Layer's coordinate space to copy data from.
dstLayer Guacamole.Layer The layer to draw upon.
x Number The destination X coordinate.
y Number The destination Y coordinate.
transferFunction function The transfer function to use to transfer data from source to destination.
Source:

transform(layer, a, b, c, d, e, f)

Applies the given affine transform (defined with six values from the transform's matrix).
Parameters:
Name Type Description
layer Guacamole.Layer The layer to modify.
a Number The first value in the affine transform's matrix.
b Number The second value in the affine transform's matrix.
c Number The third value in the affine transform's matrix.
d Number The fourth value in the affine transform's matrix.
e Number The fifth value in the affine transform's matrix.
f Number The sixth value in the affine transform's matrix.
Source:

Events

oncursor

Fired whenever the local cursor image is changed. This can be used to implement special handling of the client-side cursor, or to override the default use of a software cursor layer.
Parameters:
Name Type Description
canvas HTMLCanvasElement The cursor image.
x Number The X-coordinate of the cursor hotspot.
y Number The Y-coordinate of the cursor hotspot.
Source:

onresize

Fired when the default layer (and thus the entire Guacamole display) is resized.
Parameters:
Name Type Description
width Number The new width of the Guacamole display.
height Number The new height of the Guacamole display.
Source: